PROLiNK PHC1101 Outdoor Wireless Bridge AC450 CPE/Access Point

(No reviews yet) Write a Review

Description

HIGH PERFORMANCE & WIDE COVERAGE

Supports 5GHz 802.11ac standard with data rate up to 450Mbps

Compact size with built-in 11dBi MIMO panel antenna provides stronger signal strength and better coverage

Support TDMA (Time-Division Multiple Access) technology

MULTI-MODE OPERATION MODES

Supports Bridge/WDS, AP, Repeater and Gateway modes

ROBUST IP65 RATED HOUSING

Dust-tight and water-resistant protection

POWER OVER ETHERNET (POE)

Supports Passive PoE powered to ease installation

HARDWARE FEATURES

Interface	1* 10/100Mbps Ethernet WAN Port (Passive PoE In) 1* 10/100Mbps Ethernet LAN Port 1* Reset Button 1* F(Function) Button 1* S(Setting) Button
Power Supply	Passive Power over Ethernet through WAN Port, or DC Jack In (12V 1A)
LED Indicator	Power, LAN, WAN, Master/Slave, Wi-Fi Channel
Antenna Type	Built-in 11dBi High Performance Panel Antenna Beam Width: 60o
Enclosure	Outdoor IP65 Dust-tight Water-Resistant Protection

WIRELESS FEATURES

Wireless Standards	IEEEE 802.11 ac/an/a
Frequency	5GHz AC
Data Rate	Up to 450Mbps
Transmit Power	Up to 20dBm Note: maximum transmission power may vary across different countries subject to local regulatory and regions in which the device is used
Transmission Distance	Up to 1Km (in Wireless Bridge mode) *
TDMA Support	Yes
Multiple SSID Support	Up to 4 Multiple SSID
Physical Wi-Fi Channel Configuration	Configurable through F(Function) and S(Setting) buttons in the device
Physical Master/Slave Configuration	Configurable through F(Function) and S(Setting) buttons in the device (only for Wireless Bridge/WDS mode)
Wi-Fi Analyser	Supported

SOFTWARE FEATURES

Wireless Configurations

PHN1102

HARDWARE FEATURES

Interface	1* 10/100Mbps Ethernet WAN Port (Passive PoE In) 1* 10/100Mbps Ethernet LAN Port 1* Reset Button 1* S(Slave)/M(Master) toggle switch
Power Supply	Passive Power over Ethernet through WAN Port, or DC Jack In (12V 1A)
LED Indicator	Power, LAN, WAN, Master/Slave, Wi-Fi Channel
Antenna Type	Built-in 12dBi High Performance Panel Antenna Beam Width: 60°
Enclosure	Outdoor IP65 Dust-tight Water-Resistant Protection

WIRELESS FEATURES

Wireless Standards	IEEEE 802.11 b/g/n
Frequency	2.4GHz N
Data Rate	Up to 300Mbps
Transmit Power	Up to 20dBm Note: maximum transmission power may vary across different countries subject to local regulatory and regions in which the device is used
Transmission Distance	Up to 2Km (in Wireless Bridge mode) *
Multiple SSID Support	Up to 4 Multiple SSID
Physical Master/Slave Configuration	Configurable through S(Slave)/M(Master) toggle switch in the device (only for Wireless Bridge/WDS mode)
Wi-Fi Analyser	Supported

SOFTWARE FEATURES

Wireless Configurations	2.4GHz a/an/ac modes Automatic / Static Channel Selection Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption SSID Broadcast Enable/Disable Multi-SSID Wireless MAC Address Filter
Operation Mode	Wireless Bridge/WDS, Gateway, Wi-Fi Repeater, Wireless AP
WAN Connection Type	Dynamic IP, Static IP, PPPoE
Management	Web-based http management (local / remote) Device discoverable through PROLiNK Wireless Controller (when WAN mode is set to get DHCP from AC) System Log
System Tools	Run-time Wireless Traffic Connection Rate Wireless Analyser Connected Clients information